|
Help with mounting pedals
Hello, didn't know where to post this.
Building a classic roadster, quite a few modifications. Re worked the firewall, moved the frame rail over and made the foot well larger, shrunk the transmission tunnel. Using tilton 600 series firewall mounted pedals. Wondering if there's a rule of thumb on how high off the floor to mount the pedals. The range of motion isn't an issue, I'm just trying to figure out if there's a height to the bottom of the pedal, to the center of the pedal... the pads are adjustable. Any insight and suggestions appreciated. |
| All times are GMT -7. The time now is 11:16 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: