460 dipstick question

bran3b · #1 (**permalink**) 06-02-2002, 05:09 PM

What are the measurements from handle to full and add marks on the dipstick? I have a 460 with a stock front sump pan. I have a modified 351 dipstick which was made by following the directions of a local Ford performance shop. Recently I noticed the oil guage quiver under braking. This looks like bubbles in the oil lines to me. After seeing this I parked the car, and will do a oil change and look for debris which could indicate a blockage somewhere. Before I put the car back on the road I want to make sure that I am giving it enough oil.

Thanks for the help,
Bran

bran3b · #2 (**permalink**) 06-02-2002, 06:59 PM

I forgot to mention, for some reason I can't find a 429/460 front sump dipstick in Colorado. I can't even find one in a salvage yard.

Thanks again

cobrashoch · #3 (**permalink**) 06-02-2002, 07:13 PM

Brandon- stock 460's generally hold 6 quarts with the filter . Next time you change the oil after running your car mark your dipstick at that level. I also found that 460's run a bit better with a extra quart but they tend to blow/throw it out over 1000 miles or so.
You also need to upgrade that stock pan for a performance pan even with stock engines in Cobras. Cheap insurance.
cobrashoch

bran3b · #4 (**permalink**) 06-02-2002, 07:23 PM

Thanks Ron, I will take your advice on how to mark the dipstick tomorow and replace the pan asap.

Thanks again