need Lone Star hood latch advice

Steve R · #1 (**permalink**) 09-22-2002, 06:06 PM

Guys,
My friend is building a Lone Star Cobra. He is at the point of positioning the hood latches. He has 2 sizes of cam wedges to work with. Lone Star has not been much help in the advice dept. Any advice/ trade secrets would be great. It would also be helpful if you can post pictures of where the cam wedge best fits into it's slot.
Thanks,
Steven

Steve R · #2 (**permalink**) 09-24-2002, 11:14 PM

Theres got to be a Lone Star guru out there...

Scott S · #3 (**permalink**) 09-27-2002, 06:56 PM

I first had the funky hood pins that centered in the the small indentation in the web area under the hood. I used the same holes for the hood pins for the latches and cut out a pattern slightly bigger than the cam wedge so that the wedge would fall down through the hole and turn to secure.

Steve R · #4 (**permalink**) 09-27-2002, 08:40 PM

Scott,
Thanks buddy. I'll pass your idea on to my friend.
Steven