dyno 2000

62406 · #1 (**permalink**) 10-19-2002, 04:28 AM

hi guys,
i'm new to the club but have been waching posts for a year now and am amazed at the level of knowledge here. well here's a question for you.
does the dyno program have a database of airflow for certain heads that i haven't found? some of you guys relate hp to a certain type head ie tfs or twisted ect. i'm working on a 428 config for my still ( but close) undecided cobra (read down to three) thanks in advance.

CCX33911 · #2 (**permalink**) 10-19-2002, 08:21 AM

You normally have to obtain the flow data somewhere else. If you are trying to find flow data for an FE I suggest you post a message on www.fordfe.com. Some other manufacturers such as www.airflowreasearch.com post flow numbers for their heads. I believe that Dyno2000 will provide representative results. Some suggest that the answers are about 10% high.

YMMV

Gary

62406 · #3 (**permalink**) 10-19-2002, 10:20 AM

ccx33911
thanks, looking to build a streetable, cruiseable 428 for a close resembling cobra. 400-450hp raced enough in my younger years.

CCX33911 · #4 (**permalink**) 10-19-2002, 02:45 PM

The guys at www.fordfe.com are really good. I would suggest giving them an idea of what performance you want and ~ how much you have to spend and they can recommend a good starting point for components, etc.

Take care
Gary