compomotive wheels

Roger · #1 (**permalink**) 05-03-2003, 05:22 PM

If somebody out there has 5 lug 15" compomotive replicar wheels, can you tell me what the centre hub inside diameter is?

poorboy · #2 (**permalink**) 05-04-2003, 07:55 PM

Roger,
Do you want the diameter where the knock off goes?

Poorboy

Roger · #3 (**permalink**) 05-05-2003, 06:35 AM

Yes, I need the inside diameter where the knock off mounts. I have these wheels on order and I also installed a new brake kit, the kit came with a new centre hub assembly and it seems to be larger that stock, I just want to make sure it's all going to fit.

Thanks for the help!

poorboy · #4 (**permalink**) 05-05-2003, 08:18 AM

Roger,
The center hub hole is 2 1/2".

Poorboy

Blake Olson · #5 (**permalink**) 05-05-2003, 09:22 AM

I had to have my hubs machined slightly to fit correctly onto the hubs...not too much.

blake

Roger · #6 (**permalink**) 05-06-2003, 11:31 AM

I called the guy's from Compomotive and they were great help. It seems they are 2.8 inside and have a ridge that the knock off mounts to, if this is the goods I will be good to go. Thanks for the help!

Roger.

PS- The winter has been long up here, and I am chomping at the bit to get my baby out!