Pin drive adaptors

BS12756 · #1 (**permalink**) 09-22-2003, 03:14 AM

Does any one know where I could find the pin drive adaptors for a ford 5 lug bolt pattern, I would like to put my pin drive Trigo’s on the bolt on style hubs.

Bob

Bob Putnam · #2 (**permalink**) 09-22-2003, 04:55 AM

Trigo's adapters are drilled for both 5 x 4.75" and 5 x 4.5" patterns. If you need something different, Lynn may have some undrilled blanks.

Rick Parker · #3 (**permalink**) 09-22-2003, 08:00 PM

If you are planning on using PS Engineering FIA style wheels they WILL NOT FIT a 5 lug pin drive pattern. Nor will they accept either of the mentioned bolt circles. The mounting pad diameter & design on the back of the wheel dictates a six pin drive system. You may want to check with Trigo to see if their new FIA wheels will allow for 5 lug design. It would take a larger diameter mounting pad similar to the 427 styled wheel they currently offer for the 5 lug adapter setup.

Rick