Clutch Recommendation

Clois Harlan · #1 (**permalink**) 10-22-2003, 08:27 AM

I need someone to recommend a good all around clutch and pressure plate. As some of you know my clutch started slipping at run and gun last week and I am ready to order a new set up. What I want is a good all around clutch (maybe Kevlar) that I can use on the street as well as at the race track.

I appreciate your comments and suggestions.

Clois

trularin · #2 (**permalink**) 10-22-2003, 10:47 AM

Well, I use a McLeod system. It works well and hasn't been a problem.

If you are doing the race thing, this steel inlaied in aluminum sounds like it can drop weight and improve performance.

Do you have a toploader?

Just my $0.02

Clois Harlan · #3 (**permalink**) 10-22-2003, 11:36 AM

Yes, I do have a toploader. I was really hoping someone that is using a ZOOM clutch would let me know what they think of their clutch assembly.

Clois

larryar · #4 (**permalink**) 10-22-2003, 12:13 PM

I run a Centerforce with a Tilton hydraulic throwout bearing with a 428 and a toploader. Works like a champ.
Larry

Cracker · #5 (**permalink**) 10-22-2003, 12:55 PM

Clois,

I use a 12" McLeod Racing clutch (kevlar unit) with a 12" pressure plate as well. I run Racing cobra slicks and hammer my car and never have experienced slip. I'm participating in a drag event on 11/7 so that should tell the story. BTW, thanks for the info regarding starting in 2nd rather thank 1st. I might add that I am using a Richmod gear Race 5sp rather than a toploader - if it matters.

Mr.Fixit · #6 (**permalink**) 10-22-2003, 05:38 PM

I used McLeod on all customers cars (some well over 600 lb/ft), and they are good. Use Kevlar disk. Some customers insisted on big advertiser clutches (centerforce) most of them are running McLeod's now. Call Red, he'll set you up.

I have never tried Zoom, so no comment on their stuff