Finishing a project - which grease?

[Cobra 29]

I have always worked around Fords and used a multiple purpose moly-EP black grease (valvoline #632) for ball joints, u-joints and tapered bearings. Upon receiving my rebuilt Jag hub carriers I noted that a thicker red grease was used. After a visit to the local parts store I found black grease for Fords and a red multiple purpose high temp / pressure grease (Valvoline #614) intended for GM, Chrysler, European and Japanese cars.

Which grease is better? Can these greases be combined? I coated the lower jag hub carrier pivot shaft with the black type and installed it before noticing that the red grease was used in the tapered bearings the pivot shaft slides thru. I do not want to disassemble and clean to remove one type of grease!

[Curt C.]

Not sure if they can be combined or which is better of the ones you mentioned. I use Mobil 1 synthetic high temp bearing grease. I have been told by folk who race that this is great stuff. I is pinkish in color.

[Rick Parker]

I think Redlines product is red.

Rick

[trularin]

I'm with Curt C. I use Mobil 1 Synth.

[Cobra 29]

I appreciate the thoughts on the very best grease but I need the best advice on the use of the Ford moly-EP versus GM red grease.