lift-the-dot snap installation tool help

d_ford · #1 (**permalink**) 03-22-2006, 04:38 PM

I had a post on here about installing the lift-a-dot snaps in a tonneau cover and the post has disappeared, I've tried doing searches but no luck. Someone posted a site listing a tool on the thread to punch the holes in the cover and I need to order one. If you know the site to find the tool will you please re-post it for me? Thanks.

Bryan Wilson · #2 (**permalink**) 03-22-2006, 07:49 PM

Doug,
I remember that thread and I archived the add for the punch.
http://www.rochfordsupply.com/produc...SubCatID_E_448
Cheers,
Bryan

jarendall · #3 (**permalink**) 03-22-2006, 07:50 PM

I used a hole punch from a hobby shop, it was for punching holes in leather, I think it was 1/4 inch dia. had to use a small piece of board and a mallet, I cut the holes and then I made small slits for the tabs on the snaps to go through, should have carried the thing to a trim shop, of course mine was a complete top and I am sure much harder to handle

strictlypersonl · #4 (**permalink**) 03-23-2006, 04:02 AM

Look about half way down on this page.

rdorman · #5 (**permalink**) 03-23-2006, 05:15 AM

The ERA site is SO helpful!

d_ford · #6 (**permalink**) 03-23-2006, 05:35 AM

Thanks again for all the help guys!

Tongue Pirate · #7 (**permalink**) 03-23-2006, 05:50 AM

I installed all my snaps with a leather punch & curved razorknife blade for the slits. The toughest part was bending the tabs. Turned out pretty good. Waiting for a warm day to fit it to the windshield....

Rick Parker · #8 (**permalink**) 03-23-2006, 07:22 AM

Hyde: You've got the Cabriolet "LOOK" going on there!

Tongue Pirate · #9 (**permalink**) 03-23-2006, 07:35 AM

That's how I get tha Chicks

Rick Parker · #10 (**permalink**) 03-23-2006, 07:42 AM

Exposed Webers and a Cabriolet Top. Sex at most flagrant Southern California style. Those Beach Chicks will fall for anything! Do they sit on the soft top hoops while you cruise around?

Tongue Pirate · #11 (**permalink**) 03-23-2006, 07:54 AM

Yup, got the surfboard in the pass seat