Fuel injection set up

FiaCobra · #1 (**permalink**) 08-05-2006, 12:32 AM

Planning on building a 347 stroker with fuel injection. Question is: What size fuel line are you guys using from the fuel cell? Spoke with a buddy of mine who races fox bodied 'stangs with strokers and he uses 1/2 aluminum fuel lines.

What's typical for our applications?

Also, can't afford a nice stack EFI system at the moment so was wondering what other types of EFI systems you guys have. Links to parts and pics of your set up would be greatly appreciated.

Dwight · #2 (**permalink**) 08-05-2006, 07:30 AM

I use a 3/8" fuel line in my Cobra. 5.0 EFI motor and a few spare parts. There is a formula to calulate the line size. Maybe someone can post it for us.
Dwight

Blittleton · #3 (**permalink**) 08-05-2006, 11:37 AM

Fiacobra,
I have been using Mass Flo-EFI and I really like it. Easy starts, elevation changes don't hurt it. This system is very easy to install. If you need other info you can contact me. I can get you one right at the 3k range.

Bill
859-630-9099

hssss · #4 (**permalink**) 08-05-2006, 05:08 PM

I'm building a 392 to put in a Lotus 7 and plan on using a spider style manifold with 92 5.0 factory style harness and ECM (probably a A9P with Tweeecer). The feed line will be -8 with a Y and feeding both rails then -6 for a return line with the rails Yed at the opposite end from the feed.

HURRICANE with FI Bosses SB Ford 351 Single Plane Racing Manifold
http://www.professional-products.com...roductford.php

http://www.sullivanperformance.com/Y.../tbadapter.htm