07-26-2003, 06:19 PM
|
|
CC Member
|
|
|
Join Date: Sep 2000
Location: Monett,
MO
Cobra Make, Engine: 2 Seat Roadster-by B&B, 460+ w/auto.
Posts: 437
|
|
Not Ranked
Yeah, pull it off and install a rear sump pan. If you find a stock pan, see if the drain plug is on the bottom. Good chance it is. We cut the bottom off and weld on a 3/16" flat stock steel and weld the bung on the side. Just make sure the sump doesn't bottom out on the pan. That thick piece on the pan takes a lot of abuse.
Ron
__________________
Ron
Nonconformist. Can't handle a real job.
|