Head Gaskets?

Nesato · #1 (**permalink**) 08-14-2003, 01:16 PM

Can anyone recommend the best Head Gasket for a 351 Cleveland with a moderate Cam, Torker Intake, 2V Heads.

Thank you in advance for your advice.

rdorman · #2 (**permalink**) 08-14-2003, 02:03 PM

.. there is pretty much only one name in gaskets, Fel Pro. Make sure you get them on the right way. Seems to me there is only one way that is correct but they will set down on the block a number of ways. Make sure both surfaces are good and flat, torque in stages to the recommended setting and after the first run.

Rick

rdorman · #3 (**permalink**) 08-14-2003, 02:20 PM

Some good information here:

http://www.federal-mogul.com/cda/cha...359__1,00.html