help

solo408stroker · #1 (**permalink**) 01-22-2004, 06:36 PM

i have a 408 stroker in a 351 w block. My question is this i want it to be EFI. I have trick flow tw heads with trick flow upper & lower intake 36lbs inj, 1.6 cran cams pro race rockers p/mounted. Will those heads work if i fully port them. im looking for around 450 to 540 rwhp. If not what heads/ intake combo could work.

V-8 · #2 (**permalink**) 01-23-2004, 09:30 AM

Hi guy;
TFS tw heads can feed a 408 stroker?

The Dreamer · #3 (**permalink**) 01-23-2004, 06:15 PM

The last few issues (the last 7 I think) of Muscle Mustangs and Fast Fords has done the most complete comparison test of SBF heads I have seen. They flow test and weight valve train components and then dyno all of the heads. The issues you would probably want to see are the last three or four. TFS heads were in their comparison.

solo408stroker · #4 (**permalink**) 01-25-2004, 11:34 PM

SO WOULD THEY WORK

The Dreamer · #5 (**permalink**) 01-26-2004, 01:58 PM

Quote:

TFS tw heads can feed a 408 stroker?

I might be mistaken, but I think this means YES.

Quote:

They flow test and weight valve train components and then dyno all of the heads. The issues you would probably want to see are the last three or four.

This means there are a lot of others that will work as well.