Webers and Engine Temps

Rick Parker · #1 (**permalink**) 08-04-2008, 08:11 AM

This thread is directed to those that have a 209/302 and 48 IDA Webers. What engine temps do you observe in a cruise mode after warm up? Which manifold do you have and what type radiator is in the car. Use for example a typical day of approx 80-90 degrees.
I've beat this topic to death in one way or another but I'm sure others are experiencing the same thing?

Thanks

Rick Parker · #2 (**permalink**) 08-04-2008, 01:53 PM

Just a nudge

Snakebit · #3 (**permalink**) 08-04-2008, 03:03 PM

My temp at ldle was a little over 200. I just installed the Meziere inline thermostat housing and I'm waiting for a smaller water pump pulley. I originally installed the Marsh performance set, which is under drive and don't think it provided enough flow. Will let you know tomorrow.

ENTDOC · #4 (**permalink**) 08-04-2008, 04:15 PM

Rick, I have the in manifold thermostat. I run 190 or so in traffic,180 or so cruising