Winter bling add-ons

menace1 · #1 (**permalink**) 02-21-2011, 11:44 PM

Hi all, Sent wifey shopping this weekend and I cut open all my UPS boxes and went to town adding a little bling to the engine compartment . Here's a few Pics of the add-ons.
This is a ball milled 8 1/2 X 15 air cleaner with a K&N filter that replaced an 8X11

This is a #8 A/N line going from a billet breather/pcv valve to the rear of the carb.

In this pic I drilled and tapped the intake adding a #8 A/N line going to the brake booster.

And the last bit of bling are these billet fan covers .

Hope you enjoyed the pics and are all doing well!

Glenn

Silverback51 · #2 (**permalink**) 02-22-2011, 04:22 AM

Looks nice.

How much HP did you gain?

67JET · #3 (**permalink**) 02-22-2011, 09:08 AM

Did you leave the manifold on to drill and tap? No Curley Q's still in there? Right?
Looks great. A little bling never hurt anybody.

menace1 · #4 (**permalink**) 02-22-2011, 06:29 PM

Not much HP John, just a little lighter in the wallet...

madmaxx · #5 (**permalink**) 02-22-2011, 06:39 PM

Nice, if you haven't already upgrade the oil pressure line to braided and get rid of the plastic one.

menace1 · #6 (**permalink**) 02-22-2011, 06:42 PM

Yes I did leave the manifold on. Took off the carb and stuffed a lightly greased terry cloth in the runner. Also pretapped the hole b-4 completly going all the way through with a smaller well greased bit that caught all the chips.

dont · #7 (**permalink**) 02-23-2011, 10:01 AM

Nice looking mods. I have the same pcv breather. If the AN line going to the brake booster is touching the firewall be aware that it will scratch it up.