Roush 427R- I have conflicting information so here is the question: Is it possible to tell if the intake is single or dual plane from the outside without removing the carb or the intake from the engine?
They usually fit edelbrock victor- which is single plane.
If not, torker is single plane, performer is dual
I have the performer fitted, and a torker on stand by, I'll probably swap over one day to see the difference
Mark
Roush 427R- Is it possible to tell if the intake is single or dual plane from the outside without removing the carb or the intake from the engine?
Yes it is. A single plane will have all eight individual runners going from the plenum under the carb to the intake ports. A dual has them paired to opposite sides of the vee and generally do not have gaps between the runners.
Single or Dual Plane
Linear Mode
