SPF floor mats

ha_pe_1968 · #1 (**permalink**) 07-22-2019, 01:32 AM

Hi!
I am searching for floormats for my SPF with dropped footbox.
Had the one from Finishline with the AC logo - but seems they are not available anymore. Any other source?

Thanks,
Peter

ACademic · #2 (**permalink**) 07-22-2019, 05:26 AM

Hillbank. You might pay a little more but you’re also guaranteed they will fit. Otherwise try Olthoff Racing (another SPF specialist).

scootter · #3 (**permalink**) 07-22-2019, 09:35 PM

I also had the finish line matts that I recently had to replace. I bought mine from Hillbank which the drivers side fit good with the drop floor, but the passenger side did not. I had to send them my old passenger side floor matt to get the fit correct. It took a while, but they did take care of it. The matts also came with snaps to screw into the floor then snap the floor matts into place.

timsullivan · #4 (**permalink**) 07-22-2019, 10:56 PM

Mine from Finishline are worn out but I don't want advertising (SPF) on replacements. Surely someone must make them similar to what Finishline use to sell with the Cobra logo?

ha_pe_1968 · #5 (**permalink**) 07-22-2019, 11:58 PM

Hi!
Thats the problem - the ones from Finishline are not a very good quality...but the fit and design is great. Thanks for the info with Hillbank...i am from Europe...so send back for rework is no option. Snaps are not a must for me...i use the same clips like on the Softtop. So i am still searching....
Peter

Andheeezonit · #6 (**permalink**) 07-23-2019, 07:46 AM

I bought beautiful non logo mats for my SPF. I will look tonight to see where they came from.

ha_pe_1968 · #7 (**permalink**) 07-23-2019, 09:03 AM

Great! Thank you very much.
No Logo would be ok for me :-)

Andheeezonit · #8 (**permalink**) 07-23-2019, 07:11 PM

I just went through my insanely huge stack of receipts for my build and I found nothing on the floor mats. I am pretty sure that they came from Hillbank and I requested no logos on them. Mine have snaps that screw into the floor as well. They keep the mats in place.

Chilibit · #9 (**permalink**) 07-23-2019, 07:37 PM

If I was back in Europe I would just take the existing mats to a shop and have something made to order. I suppose you could do it in the States as well. Have the binding done in the color of your car.

ha_pe_1968 · #10 (**permalink**) 07-24-2019, 12:19 AM

Thx very much for your suggests. Will try Hillbank and Olthoff and if i have no luck i will try to do something local.
Peter

Sawdust · #11 (**permalink**) 07-24-2019, 09:36 AM

Peter you can get them from Rick Muck at Timemachines. He’s a regular on this forum