Superformance MK II trans question

[otto]

Superformance wants you to use a TKX trans , my build will only be around 300HP and with skinny tires , i am looking at 94-95 T5 that is rated for 300hp but it is an inch longer as it uses a different bellhousing and input shaft , will there be enough room on the crossmember to slot the holes
any info would be great
thanks Bob

[Mark IV]

Originally Posted by otto

Superformance wants you to use a TKX trans , my build will only be around 300HP and with skinny tires , i am looking at 94-95 T5 that is rated for 300hp but it is an inch longer as it uses a different bellhousing and input shaft , will there be enough room on the crossmember to slot the holes
any info would be great
thanks Bob

Yes, we have used the T5 in the MK II chassis.

[CompClassics]

You can use a T10 as the original 260/289 Cobras used but you have to use a Hurst Competition Plus shifter assembly as the Ford shifter assembly is to wide and hits the tunnel.