Jag Diff rebuild specs

[albanycobra]

Hey Guys

I'm freshening up my Jag diff with new bearings. I'm hoping someone can give me the specs for the the following

Diff I have is a salisbury 3.3 ratio powerlock, 5 bolt output
shafts with single large bearing.

1- Crown & Pinion Back lash
2-Carrier bearing preload / clearence
3- Pinion nut torque
4- pinion bearings rotating torque
5- out put shaft bearing retaining nut torque ( I have the large
single bearing
6- Output shaft flange to diff housing feeler gauge clearence.

Cheers
Dave

[redmt]

Email sent