Wiring ??

WildBill3 · #1 (**permalink**) 06-15-2009, 06:15 PM

Ok I was putting in a grommet through the firewall for the MSD box .I also cut the wires for the box and was thinking of putting in conectors so we could unhook the MSD ,but not wanting to create alot of resistance in the wire sodering the ends and soforth is ther anything I should be watching for or is this a bad idea? Or Should I just resoder the wires and go with that?

FWB · #2 (**permalink**) 06-15-2009, 07:06 PM

i would make it disconnectable. any afterthought welding will require it to be disconnected, and for ease of changing it incase of failure.

fred

WildBill3 · #3 (**permalink**) 06-16-2009, 04:10 PM

Has anyone else done this did you get a multiwire plug? or just put several different connecters on?

elmariachi · #4 (**permalink**) 06-18-2009, 10:19 AM

I was thinking about finding a nice Molex plug, but hadn't gotten around to it yet. Post up what you find and decide to do. I would hope that the MSD isn't too fickle to function with a well-prepared plug in the wiring.

FWB · #5 (**permalink**) 06-18-2009, 01:49 PM

cole-herse has a nice selection of quality plugs......

http://www.colehersee.com/catalog_top/index.htm

fred