B&M auto shifter neutral switch

[elgecko]

Installing a B&M auto shifter that has a micro neutral safety switch.
Can I wire this up with the 12 ga. wire coming from ign. switch S post , into the micro switch and then to the firewall mounted solenoid switch for the starter?
Will the micro switch handle the amps? The switch has a rating of 15amps.
If not, can a relay be installed.
I do have a 12v, 30amp 4 post relay laying around.
Thanks
Dave

[PSB]

The solenoid doesn't draw a lot of power. I'd say it work without a relay.

Pete

[FWB]

Originally Posted by elgecko

Installing a B&M auto shifter that has a micro neutral safety switch.
Can I wire this up with the 12 ga. wire coming from ign. switch S post , into the micro switch and then to the firewall mounted solenoid switch for the starter?
Will the micro switch handle the amps? The switch has a rating of 15amps.
If not, can a relay be installed.
I do have a 12v, 30amp 4 post relay laying around.
Thanks
Dave

what are you going to do for reverse lights? have you considered the ford type neutral safety with the reverse light switch? looks like you have a C-6 by your photos.

http://www.cjponyparts.com/images/265/SW877.jpg

[elgecko]

What reverse lights. Never had any.
The shifter does have a micro switch for those if needed.