SPF Slave Cylinder Part #

JAM1775 · #1 (**permalink**) 09-22-2011, 06:47 AM

Can anyone please tell me the part # of our SPF slave cylinder from Mike Forte's ?
Or...NAPA ( right near me)
Or...Summit Racing ?

Thanks !
jam

PurpleVenom · #2 (**permalink**) 09-22-2011, 07:27 AM

Stl mark on here is replacing his today. He ordered one from autozone for a 1960 ford f100. May ping him to get more info. He said you can view the part online, so maybe go to their website and look it up.

PurpleVenom · #3 (**permalink**) 09-22-2011, 07:34 AM

Duplicate post

Mark IV · #4 (**permalink**) 09-22-2011, 08:34 AM

P/N depends upon engine and what system the installer used. The big block are usually the F100 unit, Windsors often the Ford Probe unit.

JAM1775 · #5 (**permalink**) 09-22-2011, 08:39 AM

I looked up that Autozone part which shows Part # 11206'
I just sent STL MARK a PM to verify .

Thanks !
jam

JAM1775 · #6 (**permalink**) 09-22-2011, 09:04 AM

Ok thanks....gotta get under my car.

jhv48 · #7 (**permalink**) 09-22-2011, 12:21 PM

Since all the installers can use whichever one they prefer, I just took mine off and then matched it to one on the napa web site. I think it cost about $15.

JAM1775 · #8 (**permalink**) 09-23-2011, 03:51 PM

Okay guys I have the slave cylinder. I have not yet installed it but it's a dead match. NAPA Part # 73470
Thanks for all your help !
Jam

Bob In Ct · #9 (**permalink**) 09-23-2011, 07:21 PM

SPF Clutch Slave Cylinder

Bob