| cal0077 |
09-27-2015 02:37 PM |
clutch cable replacement
Hi
Got a question about clutch cable. In the video you will see the arm that the end of the clutch attaches to. My question is it suppose to have that much play in it or is it suppose to be tight( tight Im guessing)
|
| RET_COP |
09-27-2015 07:17 PM |
I have a Mcleod throughout bearing and fork. I set mine up so the throughout bearing has a little pressure on the pressure plate fingers. This way there is no chirping and the TKO600 shifts into 3rd real clean under power. There is still a little pedal movement before the clutch is disengaged but not much.
|
| cal0077 |
09-28-2015 07:51 AM |
thanks
|
| All times are GMT -7. The time now is 11:48 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
