NON-Hyd throwout Bearing for TKO 600

kvonbehren · #1 (**permalink**) 12-26-2017, 01:47 PM

Getting ready to assemble a tko 600 with Quick time bellhousing to a 385 series BBF. I'm not using a hyd throwout so I need to know what the Ford part number is for a TOB. Everything I read says the M-7548-A Motorsport bearing fits all the early trannys but says nothing about the tko 3550, 500/600. Also like to get some info on what pilot bearing to use in Scat steel stroker crank.

Mark IV · #2 (**permalink**) 12-26-2017, 02:05 PM

That bearing will work. We use it with Quicktimes for our customers. The slave cylinder mounting is important. You need it centered best as possible so the pushrod stays in line/plane with the hole in the clutch arm.

kvonbehren · #3 (**permalink**) 12-26-2017, 02:18 PM

Excellent, thanks. I'm using a slave cylinder and bracket kit from Rosehill Performance. It was designed to work with tko/quicktime and a sbf but it looks like it will line up very well with the 385 quicktime. I'll know for sure when I get the TOB and mock everything up. Thanks for the help