Tremmec TKO II - Shifter and knob

rsimoes · #1 (**permalink**) 03-25-2003, 04:06 PM

I purchased a T handle shifter shaft from Finish Line and I am looking for the OEM looking shift knob with the Tremmec shift pattern. Does anyone know where I could find this?

Finish Line offers the 4 speed and a blank one only.

Also does anyone know where I can get the short throw shifter for it?

Thanks!

George Snyder · #2 (**permalink**) 03-30-2003, 07:16 PM

Rob,
Try here. They may work.
http://www.motorhead.com/shop/all/?i=a&l=2vta1
Bud

Bob Putnam · #3 (**permalink**) 03-31-2003, 05:27 AM

RSimoes,

Check the thread on your handle. If it's "correct", the thread will be 1/2-20. None of the knobs listed on Motorhead will fit...

mikiec · #4 (**permalink**) 03-31-2003, 07:25 AM

What you might have to do is get a generic knob or one you like and drill it out. Make an insert with the proper thread size and count. Like Bob says 1/2-20. Press or glue in the insert into the knob.

Mike