Finding Parts

divineone · #1 (**permalink**) 05-07-2003, 09:47 PM

A dear dear freind of mine is rebuidling a 67 shelby and everyhting is almost set, she is just having a little trouble with finding some things in her area.. she is looking for "Stock Ford 351 cubic inch Windsor Four-barrel carburetor with Cruisamatic transmission H-D-7" and "Ford Toploader 4 speed or a C-6 Ford automatic transmission" if you know anyone in the michigan area that might be able to help it would be very helpful

A Snake · #2 (**permalink**) 05-07-2003, 11:41 PM

Just tell your friend to start calling the wrecking yards. Everything but the 4spd should be available there. I think finding a "cruis-o-matic" hooked up to a 351 might be a little tough. They used c-4 & c-6 depending on the year and application.

See David Kee's ad on this site for top loaders.

Al

Ken Greene · #3 (**permalink**) 05-08-2003, 05:01 AM

if you want a top loader ya gotta go to David Kee
He's a banner holder here
best service and knowhow around

XXQQQME · #4 (**permalink**) 05-21-2003, 10:38 AM

Try this link:
www.toploadertransmissions.com/
I've got a Dan Williams in mine.

Carnut427 · #5 (**permalink**) 06-10-2003, 10:45 PM

FWIW, if she's got a Shelby, it would be worth her while to put original parts back. The 67 GT350 had a 302...the 351 didn't arrive until '69.
If it came with an automatic, she would have to find another pedal unit for the clutch. If it came with a four-speed, as mentioned earlier, David Kee is the guy to go to.
Good Luck,

Dan