Template for notching the Bellhousing

GregN · #1 (**permalink**) 10-01-2003, 10:45 PM

Does anyone out there have a template or experience with notching the bellhousing for a CSX 4000 car?

I am told that I will need to notch the bellhousing on the starter side to install the housing so it will not rub the frame.

Greg

PatBuckley · #2 (**permalink**) 10-01-2003, 10:54 PM

There are some pictures on the Gashole site - look in the "Your Car" forum.

Wait till tomorrow as I think there is some housekeeping going on right now.

Cobra75 · #3 (**permalink**) 10-05-2003, 03:37 PM

Here's a pic of my Lakewood BH in my 4000. Not apparently notched.

GEORGE ANDERSON · #4 (**permalink**) 10-05-2003, 07:00 PM

Greg.....these images may help.

Shelby Mods

steve meltzer · #5 (**permalink**) 10-15-2003, 04:28 PM

Greg, I have a Kirkham with Lakewood BH, and yes, you will need to trim the BH. I don't have any pictures at the moment, but if you are interested, let me know, and I can take some pictures and measure the trimming...we did it by guesstimation, and God smiled on us...this time. steve meltzer, "I may be wrong, but I'm never in doubt"

surfer44 · #6 (**permalink**) 10-28-2003, 04:38 PM

Look in my picture gallery. I notched a Lakewood on a 428.
http://www.clubcobra.com/photopost/s...at=500&thumb=1