T-5 with hydraulic clutch

[Gman1013]

I am using a similar setup with the same CNC slave cylinder. The main problem I am having is that my clutch fork is resting on the back end of the bell housing. It seems that my flywheel/clutch assembly is too thick and extends too far back toward the transmission giving limited clearance between the clutch fingers and throw out bearing.

Thanks everyone for the help.

Greg

[Gman1013]

Not sure if the parts store gave me the wrong throw out bearing or not. I have ordered a larger Master Cylinder for the clutch and hopefully that will allow for enough travel to engage/disengage the clutch. I will keep you posted. Thanks for all of the help!!

Greg