Slave Cylinder Help Needed

Scott7557 · #1 (**permalink**) 04-22-2006, 01:34 PM

I will be getting a Shelby kit Cobra with 351 SB and McLeod scattershield, flywheel, and 12" single disk cltuch. Also putting in a Tremec TKO 600 RR (.82).

I need a hydraulic clutch slave cylinder to go with my AFCO master cylinder. What brand of slave cylinder has proven to be a good quality piece - a part # would be helpful.

Also what should I do about a mounting bracket for this slave cylinder? Does someone make a bracket that will bolt up directly or do I have to make my own?

Scott

LMH · #2 (**permalink**) 04-22-2006, 03:24 PM

Scott,
Call Mike Forte and ask him about slaves and brackets. I know he has a couple different kinds of set ups.
Larry
http://www.fortesparts.com/

sllib · #3 (**permalink**) 04-22-2006, 04:47 PM

Scott;
Try McLeod. They make both the slave and the bracket.
Bill Stradtner