TKO 600 spline count

lineslinger · #1 (**permalink**) 09-02-2007, 10:06 AM

Can someone offer up some information on the number of splines on the Tremec 600 input shaft, the longer version, not the shorter replacement.
I have a line on a nice clutch set up and am verifying that it all matches up properly.
Its a dual friction plate, I have read they chatter a lot, opinions/experience would help.
Thanks.

kris-kincaid · #2 (**permalink**) 09-02-2007, 01:03 PM

26 spline, the same as the BW T-10 used in 70's Corvette's and Trans Ams. A Dual-Friction works great, a friend has had one behind an FE for over 10k miles with no issues.

Tom Kirkham · #3 (**permalink**) 09-02-2007, 04:39 PM

The short Ford input shaft and the long GM shaft have the same spline.

dlampe · #4 (**permalink**) 09-02-2007, 05:39 PM

Those clutches do chatter a little but once you drive it, you will never go back. I had it in my Kirkham and know in the gt40. They are great, they just don't like to slip.

lineslinger · #5 (**permalink**) 09-02-2007, 08:54 PM

Dean, Tom, Kris, I thank you for the input guys.