26 spline clutch disc for TKO-600?

[Dangerous Doug]

TKO-600's have a 26 spline input shaft. Ford Racing nicely points out the need to use a 26 spline clutch disc, but offers no such part.

Where do I get a 26 spline clutch plate for a TKO-600?

[patrickt]

Originally Posted by Dangerous Doug

TKO-600's have a 26 spline input shaft. Ford Racing nicely points out the need to use a 26 spline clutch disc, but offers no such part.

Where do I get a 26 spline clutch plate for a TKO-600?

McLeod, Centerforce, they all offer them -- just give them a call.

[lineslinger]

This company has been very helpful to my needs, good analysis, patient, fairly quick shipping. http://www.thedrivenman.com/
Also there is member in here, jimig@standardtransmission.com who is knowledgeable and very helpful.

[Burgs]

It's a GM disc.

[wrench87]

i dont know if this helps, but i bought a ram aluminum flywheel from mike forte from fortes parts connection part number 2519 he has ram drill them out for the chevy pressure plate and i purchased a a ram clutch kit part number 98764, he swaps out the chevy throw out bearing for the ford unit and i use the ford fork with an extender on the end for the cable for proper alignment.

[Dwight]

I have bought several trannies, bell housing, etc., from D&D. Best price and great service!
Give them a call.
http://www.ddperformance.com/

Dwight

[Cobra 29]

After taking out my old 3550, I saw that I had a little used, good FMS pressure plate made by Centerforce. So I researched the Ford Racing Catalog and found that the same dual friction disk was part number FMS-M-7550-T302. I ordered ths disk (only) from Summit. I installed it and have had no problems with my new disk and TKO600.

I purchased my TKO from Jimi at Standard Gear. He was very helpful.

[Jimi G]

Originally Posted by Burgs

It's a GM disc.

Bingo, just get the same size disk for a GM with 26 spline, if you can't find anything locally let me know I can get you fixed up. jimig@standardtransmission.com