reverse autometer/Tremec

[cal.cheesehead]

Once my body is back from the paiter I'll be doing the final assembly on my Unique Cobra. Do I need an adpter for my reverse autometer speedometer connected to my tremec TKO600.? If so where can I purchse it. Thanks

[sllib]

No adapter is required. Before you hook the speedo cable to the tranny, bolt the speedo in place, hook the cable to it and make sure it spins free. There is a small drive shaft between the reverser and the Autometer speedo that had to be "adjusted" with a grinder on mine to keep it from binding. If it binds you get to buy another cable.
Bill Stradtner

[damdfw]

You will need a reverse gear for your autometer reverse speedometer if you don't have one.

Like this one http://www.tristatemotorsports.com/D...ct.cfm?ID=8150

[Xavier]

I will sell you mine for $15 chees head. PM me if you are interested. You will need the reversing gear...I have the exact one damdfw posted in the link.

[sllib]

My Autometer speedo on my Unique had a right-angle reverser as part of the package. Again, try it before you drive it. When you tighten the reverser down it can bind against the speedo. It only takes a minute to try it but a week to get a new cable for your T600.
Bill Stradtner

[cal.cheesehead]

Thanks,all. got the adapter on order. Appreciate all the help
cheese