Throttle Cable Bracket

[Xavier]

I made the purchase for my 48 IDA (408w) and they are here ready to get installed. I wanted to keep my throttle cable, I have a center bell crank off the manifold and I am in need of an throttle cable bracket that either mounts on the manifold somehow (?) or the firewall I suppose (not preferred). I read many refrences to an "accelerator cable" in the manual, but no pics and Google does not return anything. That and I cannot get a picture of anyone's cable system, I see some are cable, but I do not see how it was mounted.

Before I made something, I wanted to make sure there was not something already out there for $10. The only thing I seen referenced to is the below link, which is for a DGV.

http://www.webercarbsdirect.com/product_p/101.099.htm

Where can I get a throttle cable bracket for the 48 IDAs??

Thanks.

[bobcowan]

I was not able to find anything off the shelf. I made one from 18g sheet metal. Time consuming, but not difficult.

[1985 CCX]

If you are looking to replicate 60's car you will need to toss the cable and go with linkage..........

[Xavier]

With a 408w? No thanks, too much fibreglass and basically everything being beautifully wrong to consider that. Maybe another time, but right now, just a cable.