Alignment recommendations

[pctechmgr]

Hey guys! I finally have FFR2131 running. Thanks Ozona!

But I need an alignment and don't want to go to some highschool kid to get it done RIGHT! So, does anyone have any recommendations in the area on where to go for a top quality alignment job?

Also, what is everyone using for the top control arms? My kit, being older, has the slots, but this has proven to move around too much. Thus wacking the alignment to heck.

Thanks.

Joel

[Mr.Fixit]

In what area?

[pctechmgr]

I live in Naperville, but work in Vernon Hills, so anywhere in the Chicago area. I'm willing to drive for a quality job!

Joel

[FFR2231K]

Joel,
I had guy my age do it at the Goodyear place on Dundee in Wheeling. This is the same place I ordered the tires from and the manager mounted them. If you got the adjustable upper A-arms it is easy to weld on a couple of stamp to hold things in place. If you have the non adjustable A-arms, you will need to lock them down. Someone on the forum has an alum block that I have heard works well. I could not aford that so I used some 1/4" flat stock, drilled and taped 5/16 NF and welded them in place. I did that with the body on and it was a pain. If you can, get it done before.
Are you still looking for help with the wiring?
Mark