Clayboy
Thu December 2, 2010 2:00pm
Rating: 10
|
Homemade lift
Cobra in position
|
|
63mercury
Sat January 22, 2011 2:17pm
|
brakes 5
spacer needed to position rotor properly for caliper, this spaces the whole axle/bearing assy out .125 .
|
|
Dubbs
Sat June 4, 2011 7:14am
|
|
lal Naja
Sat August 6, 2011 1:57pm
|
Side view of the hub with locking key removed.
It added about 1 1/4" to the steering column length. Position is very ergonomic and leg space between seat & wheel is increased a little.
|
|
frdfver
Thu September 8, 2011 3:33pm
|
NAF Build
Working on getting the belts positioned and mounted. Got to build the mounts in the trunk area and mod body in wheelwell area.
|
|
nanard289
Fri December 30, 2011 2:23pm
Rating: 9
|
Carbs front view
In this picture, we can see the vertical angle of 5°. In this position, we have to decrease by 1mm fuel bowl level in the carbs
|
|
justcobra
Sun January 6, 2013 7:22pm
|
RMC Series 3
Shell on trailer with door opened and roll over bar in temporary position,
|
|
52chevyred
Sun May 18, 2014 5:43pm
Rating: 10
|
Modified Hinge with Pipe Installed in Closed Position
Modified Hinge with Pipe Installed in Closed Position
|
|
52chevyred
Sun May 18, 2014 5:43pm
Rating: 10
|
Modified Hinge with Pipe Installed in Open Position
This is how it will look in the Open position.
|
|
PSYCHO
Wed June 18, 2014 2:36am
|
IMG_04502
looking at the gear selector position oops looks like mods are in order
|
|
eschaider
Tue July 28, 2020 1:15am
Rating: 10
|
Degree Wheel position lens
Optics to allow better set up and reading of the degree wheel
|
|
powrby4d
Wed September 23, 2020 3:33pm
Rating: 10
|
SVC cobra clutch bellcrank type arm
This arm is on my Shell Valley Cobra that comes out of the back of the firewall inboard of the brake master cylinder which is bolted to the firewall. So the left to right position of the pedals is actually reversed on the firewall due to some strange linkage inside the pedal box. Try8ng to find out if this is part of the reason why my clutch is essentially undrivable, and whether this is a standard Shell Valley thing or some kind of complex setup somebody did to avoid the headers.
|
|
powrby4d
Wed September 23, 2020 3:43pm
Rating: 10
|
Clutch MC and brake MC in reverse positions
This shows the clutch MC next to the steering shaft with the brake MC mounted behind it to the fender well, with the clutch MC activated by this odd bellcrank type arm that may be messing up the pedal ratio. Trying to sort out why my clutch is both super heavy pedal pressure AND has to go all the way to the floor to disengage. Anyone know if this is a standard shell valley setup? The other end is a hydraulic throw out bearing, looks like a Tilton.
|
|
OZCOBRA
Sat December 12, 2020 5:13pm
|
20201213_121228
Side Vent positioning??
|
|
super
Sun October 23, 2022 8:36am
|
passenger foot rest
adjustable, and locatable in different positions
|
|
