Eljaro
Sat August 19, 2006 1:05pm
|
12.78" x 1.25" disc and SL-6 conversion for 15" wheel
These are the parts I made to adapt a Superlite 6 pot caliper to a Jaguar front suspension. It goes with a 12.78" diameter 1.25" thick disc and fits inside a 15" Halibrand style wheel.1 Aluminum plate with two 20mm SS spacers milled on one side and the bolts, two of them with a modified head.
|
|
Eljaro
Sat August 19, 2006 1:05pm
|
12.78" x 1.25" disc and SL-6 conversion for 15" wheel
side view of the caliper with the adapter plate and bolts
|
|
Eljaro
Sat August 19, 2006 1:05pm
Rating: 1
|
12.78" x 1.25" disc and SL-6 conversion for 15" wheel
mounted hardware ready to bolt to a Jaguar front uprighr
|
|
trularin
Sun September 24, 2006 7:59am
Rating: 10
|
dual disc W/pressure plate
|
|
What'saCobra?
Fri November 10, 2006 9:22pm
Rating: 10
|
M6B @ Monza, Spring 1996, Original John Wolfe 1968 McLaren
Nice rain car. Not nice chicane apex protectors! Not wet inside at speed, warm & toasty. Wind removes windshield rain nicely. Too much radiator in cool weather, too much rain on discs until both taped-off.
|
|
1985 CCX
Tue April 24, 2007 5:09pm
Rating: 10
|
Dry fitment of Fluidyne
Now that the Milodon water pump is installed dry fitment of the Fluidyne is underway. Will need to fashion small discrete upper and lower tubing so it will sit in the car OEM style.
|
|
V-8
Fri June 29, 2007 12:38pm
|
new rear disc brakes 12.2 inç 4 piston caliper 
|
|
HighPlainsDrifter
Tue February 12, 2008 9:34pm
Rating: 10
|
Rear 8.8 install
2004 mustang GT 3.27 possi with discs
|
|
HighPlainsDrifter
Wed July 2, 2008 6:48pm
Rating: 10
|
Front suspension mod
CCE bumpsteer kit, koni shocks, manual rack,
slotted discs.
|
|
RJCCOBRA
Tue December 2, 2008 3:07pm
|
Shell Valley build
Front spindles with 11 inch rotors and GM calipers. These were removed from the frame so that the frame could be painted. The Mustang II 11 inch disc brake conversion was from aceautoparts4u's eBay store. Great prices!
|
|
Baz
Sun January 11, 2009 7:54pm
|
Re-Designed and Re-Positioned brake pedal.
When we originally done the brake pedal, as can be seen in earlier photo, we used the standard size VZ HSV SS Commodore pad on the brake pedal shaft. When it was fitted, it was discovered that there was nowhere to rest or place my left foot, other than on the floor in front of the brake. The pedal shaft was straightened and the pad reduced in size. Now it's perfect.
|
|
scales
Sat October 17, 2009 5:25pm
Rating: 10
|
My 1968 Camaro.
Cloned as a RS/SS. 327. Muncie 4speed. 12 Bolt rear. 325.1 Posi. Tic-Toc Tach. Power Disc.
|
|
Z-linkCobra
Mon October 19, 2009 1:58pm
|
Build pics
91 Mark VII lincoln rear disc set up. Has the manuel parking brake lever on the bottom of the caliper.
|
|
kitcarbp
Sat November 28, 2009 6:01pm
Rating: 10
|
Mcleod Clutch disc
Dual Friction disc
|
|
kitcarbp
Sat November 28, 2009 6:12pm
Rating: 10
|
|
