FUNFER2
Sat February 6, 2010 4:17am
Rating: 10
|
My polished 304 stainless steel "Gilmore Kit" Collector.
Need polished stainless side pipes, let me know.
Polished 304 stainless steel collector.
|
|
FUNFER2
Sat February 6, 2010 5:18am
Rating: 10
|
Hanger
This hanger has a weld tab that is shaped to fit the muffler housing and with the supplied bolts, is adjustable.
|
|
FUNFER2
Sat February 6, 2010 5:24am
Rating: 10
|
Polished 304 stainless steel "Gilmore" Kit. Muffler
The muffler does not have glass pack to be blown out, but rather louvers. They can be placed going forward, to quite the sound but, it hurts the torque some.
|
|
FUNFER2
Sat February 6, 2010 5:30am
Rating: 10
|
Polished 304 stainless steel "Gilmore Kit" Stars & points.
Stars & points welded to primaries. Now ready to be installed into the collector.
|
|
FUNFER2
Sat February 6, 2010 5:36am
Rating: 10
|
Polished 304 stainless steel pipes. "Gilmore Kit".
Collector into muffler. Notice how the collector slides between the muffler & muffler housing, for a nice tight & clean fit. Requires only a small tig weld.
|
|
FUNFER2
Sat February 6, 2010 5:41am
Rating: 10
|
Polished 304 stainless steel side pipes."Gilmore Kit"
Turn out. Notice how it slides between the muffler & muffler housing, for a nice tight & clean fit. Requires only a small tig weld. Use filler rod if you wish to smooth the weld.
|
|
FUNFER2
Sat February 6, 2010 5:46am
Rating: 10
|
Polished 304 stainless steel "Gilmore Kit". Finished.
Finished polished stainless steel side pipe. Cleaning is very easy with a quality polish. Much better than mild steel with a ceramic coating. These may last the life of the car. No glass pack to blow out. I use louvers instead. Look at the "muffler" photo.
|
|
Z-linkCobra
Thu February 18, 2010 8:25am
|
hood support close up.
Here you see the steel threaded collars pressed into the 5/8's holes. I didnt want to thread the aluminum for fear of the threads possibly pulling through.
|
|
lamaluv
Thu March 18, 2010 3:02pm
|
P1000962
Stainless Steel Clamp
|
|
Wbulk
Fri May 7, 2010 11:44am
Rating: 10
|
Ball Joint Seal Ring
This is a Fix for A Arms that use the Chrystler ball joint without a seal groove machined in. This one was from B and B. A 3/16" steel ring was added to accept the ball joint seal. It was tack tig welded on the outside edges. The rings were cut on a water jet by Kirkhams Motorsports. Barry McGill can also do the fix.
|
|
dcdoug
Thu May 13, 2010 2:25pm
|
|
Wbulk
Fri June 11, 2010 5:23pm
Rating: 10
|
Seatbelt Bracket for a V Belt
This is a bracket to attach the shoulder harness on a V belt. Made out of 1/4"X3" steel.
|
|
CSX3018
Sat July 31, 2010 6:02am
Rating: 10
|
Steel Front uprights from leaf spring as origanal
|
|
Wbulk
Wed September 1, 2010 1:41pm
|
B and B Door Hinge Modification
By drilling out the hinge for tapered bolts this allows for the door panel to set flush with door. Extra piece of 1/8" steel added in the front for strength.
|
|
MaSnaka
Thu February 24, 2011 8:33pm
|
shifter adapter project
1/4" steel bracket with 90* bend
|
|
