hi-tech cobra
Fri March 7, 2008 1:04pm
Rating: 10
|
Hi-Tech pics
Rear inner fender binding on body not allowing it to suck in.
|
|
Baz
Mon March 31, 2008 1:06am
|
Inner Exhaust for side pipes.
Took me 6 hours and 3 broken screw drivers to manually extrude every single hole. One done and one to go.
|
|
Baz
Mon March 31, 2008 1:06am
|
Inner exhaust. These go inside Side Pipes.
|
|
db replicas
Thu August 21, 2008 11:16am
Rating: 10
|
That Jamo guy gets everywhere
Although this is a photo of an inner rear arch of a Kirkham in the UK, it seems it has been tagged buy someone named Jamo!
|
|
HighPlainsDrifter
Tue December 2, 2008 9:55am
Rating: 10
|
Under hood aluminum splash guards
|
|
n6opv
Mon January 19, 2009 11:25pm
|
Arntz / Butler door
This is the final version of the Arntz / Butler door. The inner and outer fibreglass panels conceal a 2 x 4 x 0.120 wall steel tube for crash protection and rigidity. A VW door latch, striker and handle let you in and out. A plate is welded on the front, to which the hinges bolt and adjust. The hinges are press formed from 1.5 x 0.5 solid steel bar and swing on delrin bushes. Unique to the Arntz Type 4 are the Mercedes door pin and socket (just above the latch) that solidly ties the door to the rest of the cage surrounding the passenger compartment.
|
|
RJCCOBRA
Wed January 21, 2009 3:45pm
|
Shell Valley build
We're back working on getting the doors, hood, and trunk lid to fit. We had to grind half of the inner door structure to get it to fit. Now we need to do some fiberglassing to make the door structurally sound.
|
|
RJCCOBRA
Wed January 21, 2009 3:46pm
Rating: 1
|
Shell Valley build
The hood was bowed and warped so badly that we had to cut slots in the inner panel, fill with foam, and then add weight to level out the passenger's side. After the foam hardened, we put a layer of glass over the cuts and added weight again.
|
|
RJCCOBRA
Fri January 23, 2009 2:43pm
|
Shell Valley build
Here's the hood after we straightened it and put the first layer of glass cloth on the inner panel.
|
|
Baz
Thu August 6, 2009 10:54pm
|
Inner_Door_Handles_coloured_to_match_trim_Small_
|
|
Z-linkCobra
Mon November 2, 2009 11:08am
Rating: 1
|
Driver inner door
I poured and shaped the foam. Once I finish the passanger side and smooth the dash....then fiberglass work starts.
|
|
Z-linkCobra
Mon December 14, 2009 6:10am
|
Driver side inner door
This is the proposed pattern I am thinking about. The blue part will painted to match the car...the black will be carpeted to match the floor.
|
|
Z-linkCobra
Mon December 14, 2009 6:10am
|
passenger side inner door
This a different proposed pattern I am considering. Again the black will carpeted to match the floor and the blue would be painted to match the car.
|
|
Z-linkCobra
Thu December 31, 2009 5:43am
|
Frame tip
This is the front right frame tip of my E.M. chassis. I am a little confused as to what the inner bracket is for.
|
|
289ACE
Sat April 3, 2010 8:29pm
Rating: 10
|
Prop rod attachement to inner fender
|
|
