This is a complete brake and clutch pedal box assembly for either CSX chassis' 289 and 427 or for the CCX Contemporary cars. Cast aluminum pedal pads as per original hinged on double torsion spring. Grommets have been fitted to counter bored holes. Pedal arms are 3/8" thick steel plate and pivot on bronze bushings. All clevises and push rods are tin zinc plated steel. Bell nuts are stainless steel. Grade 8 shoulder screws on all pivots. Master cylinders (included) are stainless sleeved CNC specified to application. Box bottom is removable aluminum for service and assembly. Top pedal plate is hand riveted with solid rivets and rubber wipes as per original. CSX and CCX box are both shown and use the same internals.
Registered: May 2002 Location: Syracuse Posts: 405
Comment Date: Thu December 9, 2010
I am very interested in doing this to my Contemporary, but I have an undercar exhaust. would a pedal box
fit under there with the exhaust? doe you have any pictures of the box located with the frame?
Thanks,
Dan
------------------------------ THOUGHT FOR THE DAY: There is more money being spent on breast implants and Viagra than on Alzheimer's research. This means that by 2030, there should be a large elderly population with perky boobs and huge erections and absolutely no recollection of what to do with them.
mickmate Senior Club Cobra Member
Registered: September 2000 Location: Holderness, NH, US of A Posts: 5499
Comment Date: Thu December 9, 2010
Hi Dan, if you get me some pics of the underside of your footbox where your exhaust runs we can tell if the floor mounted pedal box will fit. There is a 4" gap between the pedal box and the frame rail. Dependant on your exhaust routing I'm sure we could fit it. That should work well in a street application since the exhaust would be well clear of the master cylinders.
;)
;)
;)
;)
;)
