Need help with rebuilding a World Class T5z

Bill D · #1 (**permalink**) 02-10-2017, 05:45 PM

I can't find the pin that goes into a 3/16 blind hole in the output shaft. The service manual lists the part number as 1352-043-006. It's listed as reference A13-11 in the attached exploded view.

G-Pete · #2 (**permalink**) 02-11-2017, 06:33 AM

This is not just a standard pin nor a roll pin. These come in some rebuild kits.

You have two choices: Call on Monday Borg Warner and see if they ship you one, depends on the reperesntetive they do that (don't ask how I know -hehe)
and/or
register here Vintage Mustang Forums and ask the boys. There are tons of dead T5's in that forum and might have a spare...

Good luck with your hunt!

blykins · #3 (**permalink**) 02-11-2017, 08:23 AM

Call this number on Monday:

866-253-0019. Ask for Tony. That's Astro Performance....they will be swimming in pins.

dcdoug · #4 (**permalink**) 02-11-2017, 07:04 PM

We had a World Class T5z fail twice and rebuilt it twice in a Mustang GT track car (~390HP at the wheels) before we gave up and called Blykins for a TKO-600. Just a thought.

Bill D · #5 (**permalink**) 02-28-2017, 07:56 AM

Got my pin, which turns out to be a ball that locks the bearing race on first gear. Thanks to Brent Lykins for the help. Much appreciated.

Bill D · #6 (**permalink**) 02-28-2017, 07:57 AM

Duplicate

1795 · #7 (**permalink**) 02-28-2017, 09:58 AM

Bill,

Nice to see that things are moving forward for you. Can't wait to see it when it is done.

Jim