Help with finding Classic Cobra front Clip

[Jerseydevil]

Hi all, New user here. Signed up to try and find out info on where to get body parts for a Cobra kit car that was made in the mid-90s using a Classic Cobra kit (out of Miami). Car has some front end damage and needs a new front clip. I’ve been having a difficult time trying to locate one that would work. Does anyone know who got the molds from Classic Cobra when they closed? The alternative is replacing the whole body with one from another manufacturer or doing some reconstructive surgery to the nose of the car with fiberglass and epoxy.

Thanks in advance!

[Alfa02]

@Jerseydevil , Are you talking about a "Classic Roadster" ?? made in Fargo ND. in the late 80's-early 90's, then tried a come back in the late 1990's in Fla.? These are easy to check as they have a 94.5" wheelbase. If it is, you're in a world of "Hurt" as the molds are in Canada and owned by a "CROOK" Ryan Marten, look him up on our site here. Here's hoping for the best for you, Cheers TommyRot.

[1ntCobra]

Perhaps you mean Classic Motor Carriages?

https://www.cobracountry.com/theyre-baaack-2/

Hmm...

[mr bruce]

can't help you with a cmc clip, but i have a generic set of 427 molds and I can whip you up a clip, just e-mail me to discuss, thanks, b

[joyridin']

If it is a CMC/Steetbeast, good luck finding anything from that business fiasco. Just save yourself a lot of grief and contact Mr. Bruce. He does a great job and you will be driving the car long before you ever locate anything for the CMC.

[Alfa02]

Well said joyridin', as well with Classic Roadster. Also if it turns out to be a Classic Roadster, they are not only longer (94.5" wheelbase), but 3" wider, then a std. 90" wheelbase Cobra. Either way, Mr. Bruce is "The Go To Man" TommyRot.