Not Ranked
Bleeding.
Thank you Morris. The brake master is my concern. There are 2 inputs and they are press fits. What happens when you remove the reservoir you temporarily hooked up for the bench bleed and install the BMC in the vehicle. I have to hook up 2 reservoirs with 2 braided lines to the BMC. Those braided lines I am connecting will have air in them. Won't that cause a problem or will the BMC stay primed when I put the fluid in the remote reservoirs.
Fred
Last edited by FredG; 03-16-2021 at 04:03 PM..
Reason: spelling
|