Floor mats

csw · #1 (**permalink**) 09-19-2016, 02:45 PM

Was planning on replacing my factory BDR floor mats and was wondering if anyone has found a mat with the cobra logo that will fit a Backdraft. Looked at the ones from finish line, but the bottom is about 5" smaller than the backdraft one. If not, will look at getting some custom made, but there's always someone here with an answer...and Backdraft is currently out of the factory ones.
Thanks
Chris

spdbrake · #2 (**permalink**) 09-20-2016, 08:03 AM

https://www.accmats.com/

Send them cardboard templates and embroidery locations marked on the cardboard.
Logo #154 should work.
https://www.accmats.com/embroidered-logos/

jimbo01 · #3 (**permalink**) 09-20-2016, 12:03 PM

lI have a set of Backdraft mats. they don't fit worth a damn. I took them out and set them in the stack of spare parts I have replaced. This site I like. I will likely order a set and send a pattern for size. The cobra logo looks good.

Late Apex · #4 (**permalink**) 09-22-2016, 01:25 PM

Quote:

Originally Posted by csw

Was planning on replacing my factory BDR floor mats and was wondering if anyone has found a mat with the cobra logo that will fit a Backdraft. Looked at the ones from finish line, but the bottom is about 5" smaller than the backdraft one. If not, will look at getting some custom made, but there's always someone here with an answer...and Backdraft is currently out of the factory ones.
Thanks
Chris

I recently got a set from Backdraft but if you can order a set on back order, when they do arrive Ebay has those round vintage style Cobra logo patches in different sizes. Have them sewn on the top of the BDR mats. Just an idea.

csw · #5 (**permalink**) 09-22-2016, 04:06 PM

Thanks spdbrake, but whoever I talked to said they don't so custom mats and it would just be a rectangle mat. Late apex, that's an avenue I was looking at once they came off back order. Thanks for the ideas!

spdbrake · #6 (**permalink**) 09-22-2016, 05:46 PM

Sorry for the bad link. I thought ACC still did custom work.
That is quite possible AAC won't now as companies were a bit spooked after the runaway Toyota issues were 1st blamed on the mats, or maybe its just a hassle.

You may Google your area in GA. for Auto upholstery as most are quite accommodating for custom work and have them attach a set of these in 6" dia. like Apex mentioned.
Embroidered Classic Cobra Logo Patch

Bartruff1 · #7 (**permalink**) 09-23-2016, 08:37 AM

Wal Mart has floor mats that will fit nearly anything.

csw · #8 (**permalink**) 09-23-2016, 09:59 AM

Ha Bartruff1, not sure why that wasn't my first thought! Actually had a customer begin telling me that weather tech advertises they have mats to fit everything!

BDR0572 · #9 (**permalink**) 09-23-2016, 02:02 PM

Took mine too local Upholstery shop, not cheap, I think they will be sharp looking and better quality.

Bartruff1 · #10 (**permalink**) 09-23-2016, 08:59 PM

Quote:

Originally Posted by csw

Ha Bartruff1, not sure why that wasn't my first thought! Actually had a customer begin telling me that weather tech advertises they have mats to fit everything!

I have Weather Techs in my Wrangler and they are terrible....don't fit and dump all the mud and water on the carpet when you try to take them out...

Same with my Cayman, except for the mud and water....not prudent

BDR_Boy · #11 (**permalink**) 10-05-2016, 03:14 PM

September 2016... and they're already out of mats again? They were out just a little earlier this year... and I got a set once they got some in... just got lucky with my timing.

Again... that was just a few months ago... and now they're out again??? BDR must utilize vendor managed inventory (VMI)... and they keep very little to zero inventory on hand... and rely on the vendors to have what they need when they need it... which is seldom the case.