Roush Air Filter Replacement

[tpatodd]

Since #997 was built in 2008 I figure it might make sense to replace the Air Filter in the Roush Assembly versus cleaning. Anyone successfully locate this part?

I went through the "find filter by size" on the K&N website ... nada. E3515 is the closest.

The only option at Iconic is to buy the whole assembly. No filters.

[NROTOXIN]

Closest to what? Post your filters LxWxH here so that people can give you some advice.

[tpatodd]

Has K&N printed on one side and this part # on the other: C147AB - 1

Outside dimensions: 14 1/3 x 7 3/4 x 2 1/2
Inside dimensions: 12 1/2 x 6 x 2 1/2

[S1965C]

I too have had a devilish time finding any filter taller than 2” in this oval size. 3” would be ideal but I’ll take even 2.5” if available (as a standalone filter only and no housing).

[NROTOXIN]

If you go the standard cobra oval, the below dimensions and link should help.

Tony Branda Oval 20.8 x 9.5 x 2.25
S&B Oval Air Filter Element (Tall)
https://store.cobranda.com/sbovairfielt.html

K&N
E-1963 20.8 x 9.5 x 3
E-1960 20.8 x 9.5 x 1.8 (Standard)

[tpatodd]

Just looking to replace the filter. I have this Roush assembly: https://www.iconicparts.com/roush-ov...eaner-ass.html

[spdbrake]

In this thread FredG said he uses a K&N E-3515, He has the same air cleaner as you do.
Which Air Filter
https://www.summitracing.com/parts/k...hoCRzEQAvD_BwE

[tpatodd]

Interesting, I looked at this same Filter on Amazon-- different dimensions listed: https://www.amazon.com/3515-High-Per...ps%2C67&sr=8-1

Now that I look on the K&N site, I see the same dimensions as what Summit shows: https://www.knfilters.com/e-3515-oval-air-filter

So basically.... Amazon jacked my search.

Thanks for setting me straight.

[tpatodd]

Originally Posted by S1965C

I too have had a devilish time finding any filter taller than 2” in this oval size. 3” would be ideal but I’ll take even 2.5” if available (as a standalone filter only and no housing).

I just ordered the E-3515 and will let you know how it fits.

[tpatodd]

Update: The 3515 won't work for me. I need the 2 1/2" of filter height. At 2" (3515) the screw does not tighten enough and the assembly is loose. I think a washer might look tacky.

[spdbrake]

So the screw is a few threads too long using the 2.0" filter? Can you take 3-4 threads of the screw with a dremel or belt sander?

Or buy a shorter screw?
https://www.mcmaster.com/screws/

[BDR0572]

I have the same filter and housing bought new bolt (counter sunk Allen)at Lowes polished it look like chrome sealed with clear coat, anything taller rubs hood