Cr roll bars remove

[nd-farmer]

I am trying to remove my pair roll bars for chroming, have all the 7/16 bolts pulled off under the car, and they won't budge.
They will slightly move back and forth, the rear one turns, so it is loose. I have tried tapping on them with a block of wood, but nothing, have also put longer bolts in the bottom, and tapped on them, and won't pull up.
Any information, would be greatly appreciated, I guess I am missing something. Thanks, Neil

[nd-farmer]

Found the problem, when they were installed, they silicone them to the frame? Man that stuff it tough, had to use a cherry picker to get them loose! Neil

[cobraitis]

With them out of the car would it be possible to post a couple of pictures please? Maybe some measurements. I am considering adding them to a CR kit car. Does anyone have input on potential sources?

Thanks!

[studebaker53]

I built mine from scratch buying one of these for two hoops....

Bikes, Racks, and Storage | Bike-Racks & Storage | U-Rack Bike Rack, Black, 2-Bike, Flange Mount | 442804MBK - GlobalIndustrial.com

[nd-farmer]

Sorry, I didn't read the post sooner, didn't measure, but found a diagram that gives all the specs. may have some photos.
Please send me an email address and I will sent what I have. Neil in N.Dak. 701 721 5017

[t walgamuth]

Originally Posted by studebaker53

I built mine from scratch buying one of these for two hoops....

Bikes, Racks, and Storage | Bike-Racks & Storage | U-Rack Bike Rack, Black, 2-Bike, Flange Mount | 442804MBK - GlobalIndustrial.com

Do you have a picture of your completed install, please?

[studebaker53]

Send me your email address and i can send pics!!&