Source for non-decorative crank pulley

120mm · #1 (**permalink**) 03-04-2017, 08:28 AM

Now that I've finalized my plans for my Cobra build, I'm looking for a source for non-decorative crank pulleys for a 428 FE.

Short of stealing one off a 352/390 in a junk yard, does someone have a link to a place I can order a plain, painted pulley?

The only accessories I plan to run is a water pump and an alternator.

Thanks!

Drew

DanEC · #2 (**permalink**) 03-10-2017, 04:46 AM

I would check with a couple of the major FE engine builders like Blykins and Craft Performance. Keith Craft built a lot of restoration motors and had stock steel pullies for mine.

undy · #3 (**permalink**) 03-10-2017, 05:02 AM

I bought mine off EPay. The aftermarket always wants to sell under-drive ones, the mortal enemy of cooling challenged FEs.

120mm · #4 (**permalink**) 03-10-2017, 08:35 AM

Quote:

Originally Posted by DanEC

I would check with a couple of the major FE engine builders like Blykins and Craft Performance. Keith Craft built a lot of restoration motors and had stock steel pullies for mine.

I may be getting my block from Keith Craft. I'll ask when I order

Quote:

Originally Posted by undy

I bought mine off EPay. The aftermarket always wants to sell under-drive ones, the mortal enemy of cooling challenged FEs.

Or "bling" chrome, Gold plated or stylized billet crap that does not fit into my scheme.

DanEC · #5 (**permalink**) 03-10-2017, 08:45 AM

No - not my thing either. I'll stick with a dual point distributor to avoid a red distributor cap on mine.

Mongoose930 · #6 (**permalink**) 03-10-2017, 09:27 AM

This link has been invaluable to me. Once you find the correct P/N, you can go to ebay and start looking:

Pulley

saltshaker · #7 (**permalink**) 03-10-2017, 03:49 PM

I have a extra water pump pulley from a 428
Just pay the shipping
Send me a pm
Jon

ACHiPo · #8 (**permalink**) 03-12-2017, 05:37 PM

Quote:

Originally Posted by DanEC

No - not my thing either. I'll stick with a dual point distributor to avoid a red distributor cap on mine.

MSD makes a black cap?
https://www.msdperformance.com/produ...es/parts/84313

66gtk · #9 (**permalink**) 03-12-2017, 07:35 PM

I could use one, too. The one I have seems to have a thin "groove" for the belt. I also would like to obtain a factory type water pump pulley to replace my aftermarket style one.

DanEC · #10 (**permalink**) 03-13-2017, 06:05 AM

Quote:

Originally Posted by ACHiPo

MSD makes a black cap?
https://www.msdperformance.com/produ...es/parts/84313

But it would still be an MSD.



FE Forums sponsored by Keith Craft Inc.