1Big67AC - I'm building the AC also, what (clutch) master and slave cylinder did you use? Do you have any Pics of the bellhousing with the slave cylinder installed?
Thanks,
SpeedwayPJ
I think I have a set off my old A&C they would need new bushings etc. 1note about their suspension; you must make sure your wheelbase measured from center of front hub to center of rear hub is 90” otherwise if it is shorter the top of the pinion will hit the crossmember breaking the rear axle. I also have another 9” rear from my A&C with welded brackets to adjust the lower control arm brackets for more traction.
jon
I think I have a set off my old A&C they would need new bushings etc. 1note about their suspension; you must make sure your wheelbase measured from center of front hub to center of rear hub is 90” otherwise if it is shorter the top of the pinion will hit the crossmember breaking the rear axle. I also have another 9” rear from my A&C with welded brackets to adjust the lower control arm brackets for more traction.
jon
Hey I thought I replied to you the other day. I tried sending you some pictures of my build and exhaust. If you want text me your # and I'll send some pictures 6467723611 richie
Likes Received