Compomotive Wheel

[IAMBUZMAN]

I have an irreparable Compomotive halibrand style wheel. Is there any hope of finding a replacement? I am not finding any positive results.

[Tom Wells]

IAM,

Need to be more specific: at least style, diameter, width, offset, bolt pattern.

Tom

[IAMBUZMAN]

Tom,
I will have to get that info as the wheel is still on the car. They are 15" and I would say 10" wide. It appears I could get away with just the outside barrel.

[cobragene]

Last year I had to buy a barrel and an outer rim, with 30 bolts 15”. The only place I found them was in the UK called Image wheels the phone number is a little weird +44(0) 121 522 2442 good luck

[cobragene]

I needed a barrel and an outer rim 15” 30 bolts last year, the only place I found them is Image wheels in the UK phone number is a little weird +44(0) 121 522 2442 I was told the center sections are no longer available. Good luck

[TEAM THREE WHEE]

We can re-rim into a 2 piece, by saving the center disc and boltinh it into a 1 piece spun forged outer, 360 to 400 depending on width. slao there may be some 15" rim halfs available, but it will depend on the widths needed. We use blanks and machine and drill for your center disc.
scott

[IAMBUZMAN]

Thank you, Gene. Image was able to take care of me.

[sunman]

I’ve got 16” Compomotives that are about to be very nice trailer wheels due to the 16” limited tire size situation
Can Team Three rework them to 17” or 18” wheels?